No results were found for the filter!
Lid from a used original 190 l bourbon bass, the barrel lids are cut out, cleaned and glued. On the back of the lid is still the original Charring. On the front you can still find the original print of the original distillery. These...
The barrel heads have been made out of used wine or distillate barrels. They have been cleaned, sanded and glued.
Those barrel lids are prefabricated. They’re made of American Oak ad could be used in professional barrels.
Barrel lid from a used 300 l - 350 l cognac or brandy barrel The bottom of the barrel was first painted white and blue. The shield was provided with a shield hump made of wood, finally a laser branding was applied according to the...
This special barrel head allows you to present your good drop behind a Plexiglas pane in true style. This barrel head is made from a used, professionally cleaned and sanded barrel section. The staves were dried and then glued for...
Our carpentry workshop produces decorative barrel head sections from chestnut barrels. For chestnut barrels, the head is cut off at 12-14 cm (depending on where the barrel hoops are placed). The barrel head sections are cleaned, sanded,...
The decorative barrel heads have been made out of old barrels by our carpenters. The head is professionally cleaned and glued and a pecial highlight for every bourbon fan. Dimensions ca.: Height: 15 cm ø 55 cm
The barrel heads have been cut from old wine barriques to a length of about 9-15 cm (depends on the placement of the hoops).
The decorative barrel heads have been made out of old barrels by our carpenters. The wood of the head have been treated with paint and shows the flag of Scotland.
The decorative barrel heads have been made out of old barrels by our carpenters. The barrel heads have been cut from old wine barriques to a length of about 9-15 cm (depends on the placement of the hoops). The wood of the heads have been...